+44(0) 1202 489 500
Plus -2 mehr
Guides on how to do some of the commonly asked things on our disc repair machines. If you need help at any point then don't hesitate to contact our Support team.
The Head Fan is a great indicator to show that the pads are spinning
Why is there sometimes polish left over at the end of a consumable pack?
A good Centre Bearing Assembly ensures the smooth running of the machine
A faulty lid switch will prevent the machine from starting
Removing the turret to help you clean and maintain your machine
What action you need to take on AL1, AL2, AL3, AL4, AL5, AL6, AL10, AL11, AL12
How to remove and replace the platen table module
How to remove and replace the inner pump tubing
These will need to be replaced if there is any damaged to ensure the lid applies the correct pad pressure to the disc. This will allow the machine to give the best results possible
If the machine has been left sitting for some time you may need to remove the rollers to gain access to the tubing as they may have become pinched closed so the liquid doesn't flow